No products in the basket.
FIT
Compatibility first
Designed for the VIOFO model / camera position stated in the product name: 3M Pad A119v2/A119S/A119Pro/A119v3. Front and rear mount shapes are not interchangeable.
Viofo Mounts & Adhesive accessory.
£3.99
A model-specific replacement adhesive pad or mount for refitting the VIOFO camera listed above after moving the camera, replacing a windscreen or renewing an older adhesive fixing.
Designed for the VIOFO model / camera position stated in the product name: 3M Pad A119v2/A119S/A119Pro/A119v3. Front and rear mount shapes are not interchangeable.
These pre-cut VIOFO adhesive pads are shaped for the A119 V2 / A119S / A119 Pro / A119 V3 mount, so the contact area and camera position match the original fitting.
Work the old pad away from the mount and glass, then remove residue before applying the replacement.
Clean and dry the mounting area thoroughly. A VIOFO static sticker can be used between the glass and adhesive mount to make future repositioning easier.
VIOFO's official video shows both main-unit and rear-mount adhesive replacement.
For a reliable refit, use a fresh pad on clean, dry surfaces rather than trying to reactivate the original adhesive.
Not necessarily. VIOFO uses model- and position-specific pads, so match both the camera family and front/rear position.
Remove old adhesive residue and clean and dry the area thoroughly before applying the new pad. Press firmly and allow the adhesive to bond before loading the mount.
Copyright © 2026 VIOFO UK. All rights reserved