2-channel dash cam with 4K front recording plus 2K rear. Built-in GPS.
£349.95
A 4K front camera and separate 2K rear camera record both directions at the same time. Dual Sony STARVIS 2 sensors, HDR and a compact front unit give you detailed footage without another screen on the windscreen.
The T330 2CH records 4K (3840 × 2160) at up to 60fps ahead and 2K (2560 × 1440) at 30fps behind. Turning on front HDR changes the front frame rate to 30fps.
The front camera uses an 8MP Sony STARVIS 2 IMX678 sensor; the rear uses a 5MP IMX675. Their low-light sensitivity helps retain road detail when daylight fades. HDR balances bright and dark parts of the scene, helping with headlights, backlighting and number-plate detail. Recording conditions still affect what can be read.
The rear camera records its own 2K 30fps HDR channel, with a 160° field of view and a 360° adjustable mount. It adds a separate record of traffic approaching from behind, tailgating and rear-end incidents. The front camera covers a 140° view; both lenses have an F1.8 aperture.
The screenless front unit is designed to sit high on the windscreen, behind the rear-view mirror where practical. Configure it and review recordings through the VIOFO Dashcam App. A built-in microphone and speaker support audio recording and spoken notifications; the indicator LEDs show recording, microphone, Wi-Fi and GPS status.
Connect your phone using 2.4GHz or 5GHz Wi-Fi 6 to preview footage, adjust settings and download recordings through the VIOFO Dashcam App. This is a local connection to the camera, rather than a mobile-data connection for remote fleet monitoring.
Use supported voice commands to lock footage or take a snapshot without reaching for the camera. English, Mandarin Chinese, Russian and Japanese are supported. Spoken alerts also flag memory-card errors and setting changes.
GPS, BeiDou, Galileo and GLONASS record location, speed and time information for playback, giving useful context alongside the footage.
Combine the front and rear feeds into one video file for synchronised playback and sharing, without manually assembling the two perspectives.
Loop recording reuses older unlocked footage when the card fills. The G-sensor can protect an impact recording automatically, and the side button lets you lock an important clip manually.
Start with time-lapse, low-bitrate or auto-event recording, then switch to Low Power Impact Detection when your chosen time limit or battery-voltage threshold is reached. Voltage-based switching requires the optional HK6-F hardwire kit.
Define locations such as your garage or workplace where the camera should shut down instead of entering parking mode. If you still want impact monitoring in those zones, enable Low Power Impact Recording. Super Night Vision is available within the standard parking treatment to help with low-light parking footage.
The optional HK6-F connects the camera to the vehicle fuse box for parking recording. Low-voltage cut-off helps protect the vehicle battery. Its detachable design supports installation and servicing, and Bluetooth voltage display lets you view the vehicle voltage. A hardwire kit is sold separately.
A compatible VIOFO BP60 or BP100 battery pack can power parking recording from its own stored energy instead of drawing directly on the vehicle battery while parked. Battery level can be viewed in the app and stamped on footage; a battery-capacity cut-off can control the change to low-power protection. Runtime depends on camera settings and battery capacity. Battery packs are sold separately.
The included tamper-resistant cover, four screws and hex key help protect the connections against accidental or unwanted disconnection. The slim coaxial rear cable can be tucked behind trim for a tidier installation. The supplied rear cable is 6m; check routing and cable requirements for your vehicle before fitting.
The included charger has a 30W fast-charging Type-C port for a device and a 15W port for the dash camera. Its illuminated ring helps locate the ports in the dark. Connect the dash camera to its dedicated port: the orange port will not power it.
The front camera comes with a snap-on CPL-700 polarising filter to reduce windscreen reflections and glare. An optional CPL-600 is available for the rear camera. Adjust the filter to suit the installation rather than assuming reflections will disappear in every situation.
The optional BTR200 Bluetooth remote provides one-press footage locking and configurable shortcut buttons. Built-in Bluetooth supports the remote at a range of up to 5m. The camera’s own side button and G-sensor also protect important recordings.
The T330 supports microSD cards up to 512GB, sold separately. A high-endurance card designed for sustained dash-cam use is important for continuous front and rear recording. The camera uses a supercapacitor rather than an internal rechargeable battery, so it needs an external power supply to record.
This series video shows the wider T330 range, including configurations with additional cameras. This listing includes the front and rear cameras only.
Front Camera × 1
Rear Camera × 1
Car Charger × 1 (Length: 3.5 m)
Rear Camera Cable × 1 (Length: 6m)
Type-C Data Cable × 1 (Length: 0.5m)
Front Camera CPL × 1
Spare Mount Sticky Pads (Set) × 1
Windscreen Static Stickers × 3
Trim Removal Tool × 1
Tamper-Resistant Cover × 1
Tamper-Resistant Cover Screws × 4
Hex Key × 1
After-Sales Service Card × 1
Warning Sticker × 1
Quick Start Guide × 1
User Manual × 1A 4K front camera and a 2K rear camera. Both record simultaneously. This 2CH configuration does not include a cabin, telephoto or waterproof rear camera.
The front camera records at up to 4K 60fps with front HDR off. Enabling front HDR switches it to 4K 30fps. The rear records at 2K 30fps with HDR support.
Not for normal driving: the included car charger powers the camera. For parking recording from the vehicle fuse box, add the optional HK6-F. A compatible BP60 or BP100 battery pack can power parking recording instead.
Hybrid Parking Recording, Low Power Impact Detection, Auto Event Detection, Time-lapse Recording and Low Bitrate Recording. Hybrid mode switches from standard parking recording to impact detection after the selected time or voltage threshold.
Wi-Fi 6 provides a nearby connection between your phone and the camera using 2.4GHz or 5GHz. It does not provide a mobile-data connection for viewing the camera remotely over the internet.
Use a high-endurance microSD card up to 512GB. The front CPL-700 is included; the rear CPL-600 and BTR200 Bluetooth remote are optional. Parking power accessories and memory cards are sold separately.
Copyright © 2026 VIOFO UK. All rights reserved
Looks like you haven't made a choice yet.