Viofo Remote Control accessory.
£19.95
The BTR200 puts the most useful dash-cam controls within reach. The main button protects the current clip and takes a snapshot, while two side buttons can be assigned to supported functions.
The important compatibility and practical details are kept up front so you can identify the correct accessory without relying on a similar-looking part.
The current VIOFO compatibility guidance covers current Bluetooth-capable models for sale, with A119 V3 excluded. Check the accessory option on the specific camera page where compatibility is critical.
Match this SKU and the stated camera family, connector, position or cable length before ordering.
The large centre button protects the current event and takes a snapshot. The two side buttons can control common camera functions on supported models.
The centre event button locks the current recording from normal loop overwrite and captures a snapshot at the same time. The side buttons default to microphone and Wi-Fi control on supported cameras.
Depending on the connected camera and firmware, the side buttons can be reassigned to functions including microphone, photo, Wi-Fi, power-off, time-lapse recording and HDR.
The supplied adhesive pad lets the remote sit on the dashboard, centre console or another convenient surface. The specified control distance is approximately 5 metres.
Power the camera, then press and hold the centre video-lock button for around three seconds. A blue remote LED confirms a successful pairing.
VIOFO's BTR200 tutorial walks through pairing, button customisation in the camera and app, CR2032 replacement and in-car installation.
Current compatibility and practical details checked against the matching VIOFO accessory family.
The current VIOFO compatibility guidance covers current Bluetooth-capable models for sale, with A119 V3 excluded. Check the accessory option on the specific camera page where compatibility is critical.
The compatibility and installation questions that matter most for this accessory.
It protects the current recording from normal loop overwrite and takes a snapshot on supported cameras.
Yes, on supported cameras. Available actions depend on the camera model and firmware.
With the camera ready for Bluetooth pairing, hold the remote's main lock button for around three seconds and follow the camera guidance.
Copyright © 2026 VIOFO UK. All rights reserved
Looks like you haven't made a choice yet.
